How to change battery in philips sonicare toothbrush

Philips Sonicare toothbrushes are widely used and appreciated for their unique design features that provide efficient and thorough cleaning. However, like any other electronic device, the battery of a Sonicare toothbrush may wear out over time.

When the battery of your Philips Sonicare toothbrush dies, you need not buy a new one. Instead, you can save your money and replace the batteries. In this article, we will guide you through the step-by-step procedure to change the battery in your Philips Sonicare toothbrush.

Before we start, it’s essential to note that not all Sonicare toothbrush models come with replaceable batteries. Some of the Sonicare electric toothbrush models have non-replaceable batteries that require you to dispose of the entire toothbrush once the battery runs out of charge. In such cases, you need to visit the Philips Sonicare service center for assistance.

Now, let’s get started with the steps to change the battery in your Sonicare toothbrush, which can help you save some cash in the long run.

How to Change Battery in Philips Sonicare Toothbrush

Step 1

Remove the brush head from the Sonicare toothbrush. Pull the head straight from the handle to remove it. Set it aside on a clean surface.

Step 2

Remove the battery cover. Most Sonicare toothbrush models will have a small indent at the bottom of the handle. Press down on this indent with your thumb and slide the cover off.

Step 3

Locate the old battery. The battery will be in a small compartment in the handle of the toothbrush. Carefully remove it and dispose of it properly.

Step 4

Install the new battery. Insert the new battery into the compartment with the positive (+) side facing up towards the top of the handle.

Step 5

Replace the battery cover. Slide the cover back onto the handle until it clicks into place.

Step 6

Reattach the brush head. Push the brush head back onto the handle until it clicks into place.

Step 7

Charge the toothbrush. Place the handle on the charger and let it charge for at least 24 hours before using it.

Now that you have changed the battery in your Sonicare toothbrush, you can enjoy the benefits of a fully charged and functioning toothbrush. Remember to dispose of the old battery properly and recycle it if possible.

If you are not comfortable changing the battery yourself, you can take your Sonicare toothbrush to a qualified professional for assistance. However, with these simple steps, you can change the battery quickly and easily on your own.

Step-by-Step Guide to Changing the Battery

Step 1: Gather Materials

Before beginning, gather all necessary materials. This includes a Phillips screwdriver, replacement battery, and replacement gasket (if applicable).

Step 2: Remove the Toothbrush Head

Remove the toothbrush head by gently pulling it straight off the handle.

Step 3: Locate the Battery Compartment

Locate the battery compartment on the back of the handle. It will be covered by a metal plate held in place by two Phillips screws.

Step 4: Remove Metal Plate

Use the Phillips screwdriver to remove the two screws holding the metal plate in place. Set the screws aside in a safe place.

Step 5: Remove Old Battery

Gently lift the metal plate to reveal the old battery. Carefully remove the old battery and dispose of it properly.

Step 6: Install Replacement Battery

Insert the new battery into the compartment, ensuring it is oriented correctly. Replace the metal plate and secure it with the screws.

Step 7: Replace Gasket (if applicable)

If your toothbrush has a gasket, replace it before reattaching the toothbrush head. Make sure it is properly seated.

Step 8: Reattach Toothbrush Head

Gently push the toothbrush head back onto the handle until it clicks into place.

Step 9: Test Toothbrush

Turn on the toothbrush to test the new battery. If it is working correctly, you’re finished!

Tips for Maintaining Your Philips Sonicare Toothbrush

1. Rinse Your Toothbrush Thoroughly After Use

It is important to rinse your Philips Sonicare toothbrush thoroughly after every use to remove any toothpaste residues or debris. Simply hold the toothbrush under running water for a few seconds, and let it air dry until the next use.

2. Replace the Brush Head Regularly

The brush head of your Philips Sonicare toothbrush can wear out over time and harbor bacteria if not replaced regularly. It is recommended to replace the brush head every three months or when the bristles start to fray.

• You can purchase replacement brush heads from the Philips website or at a local drugstore.

3. Store Your Toothbrush Correctly

Proper storage of your Philips Sonicare toothbrush can help keep it clean and extend its lifespan. Here are some tips:

• Store your toothbrush in an upright position to allow it to air dry completely between uses.
• Avoid storing your toothbrush in a closed container or cap, as it can promote bacterial growth.
• If you travel with your toothbrush, use a toothbrush holder that allows for air circulation.

4. Clean Your Toothbrush Handle

Your Philips Sonicare toothbrush handle can accumulate dirt, grime, and bacteria over time. To clean it:

• Dampen a cloth or sponge with water and soap.
• Gently wipe the handle of your toothbrush to remove any dirt or buildup.
• Rinse the handle with clean water and let it air dry before next use.

5. Charge Your Toothbrush Regularly

Your Philips Sonicare toothbrush is rechargeable, and it is recommended to charge it regularly to ensure optimal performance. Here are some tips:

• Charge your toothbrush after every use or as soon as the battery runs low.
• Keep your toothbrush charger in a dry place and away from moisture.
• If you are not going to use your toothbrush for an extended period, store it with a partially charged battery.