BatteryElectriсNews

How to change car key battery toyota corolla

Table of contents

Related article:  How much does a battery cost for a golf cart

If your Toyota Corolla’s key fob is not working properly, it may be due to a dead battery. Changing the battery on your car key is an easy and affordable way to fix the problem, and you can do it yourself at home without the need for professional help.

Before you begin, you will need to know the type of battery your key fob uses. The Toyota Corolla typically uses a CR2032 battery, but this can vary depending on the year and model of your car. Check your owner’s manual or consult with a Toyota dealership to find out what type of battery you need to purchase.

Once you have the new battery, you can get started on changing it. Follow these simple steps to replace the battery in your Toyota Corolla key fob:

Step 1: Locate the small groove along the edge of your key fob and gently slide a flat tool, like a screwdriver, into it. This will release the cover and reveal the battery compartment.

Step 2: Carefully remove the old battery and discard it.

Step 3: Insert the new battery into the compartment with the positive side facing up.

Step 4: Snap the cover back into place, making sure it is secure.

That’s it! With these simple steps, you can easily replace the battery in your Toyota Corolla key fob and get back to using it without any issues. It’s a quick and easy fix that can save you time and money, and you can do it yourself at home in just a few minutes.

Related article:  Who helps put in a car battery free

How to Change Car Key Battery Toyota Corolla

How to Change Car Key Battery Toyota Corolla

Step 1: Purchase a new battery

The first step in changing the battery in your Toyota Corolla’s car key is to purchase a new battery that is compatible with your key. You can find this information in your owner’s manual or by contacting a Toyota dealership.

Step 2: Remove the old battery

Step 2: Remove the old battery

To remove the old battery from your car key, use a small flathead screwdriver to pry open the key fob. Then, gently remove the old battery from its slot.

Step 3: Insert the new battery

Step 3: Insert the new battery

Take the new battery and place it into the slot, making sure to align it properly with the positive and negative terminals. It should fit snugly into place.

Step 4: Reassemble the key fob

Once the new battery is in place, carefully reassemble the key fob. Make sure the buttons are properly aligned and the casing snaps back together securely.

Step 5: Test the key

Step 5: Test the key

Finally, test your key to make sure the new battery is working properly. Press the buttons to lock and unlock your car and make sure they respond as expected.

Congratulations! You have successfully changed the battery in your Toyota Corolla’s car key!

Preparing to Replace the Battery

Gather the Necessary Materials

Before replacing your Toyota Corolla car key battery, be sure to gather the necessary materials. You will need a replacement battery (check your car owner’s manual for the appropriate battery size), a small screwdriver or key fob tool, and a clean, flat surface to work on.

Related article:  Who carries a battery for the alcatel a571vl phone

Prepare the Work Area

Prepare the Work Area

Choose a well-lit area with plenty of space to work. Lay out a clean towel or a small tray to catch any loose screws or other small parts. This will help you avoid losing any important pieces while working on your car key.

Remove the Key from the Fob

Before you can change the battery in your Toyota Corolla key fob, you must remove the key from the fob. Locate the release button that allows you to remove the key and press it, pulling the key out of the fob. Set the key aside in a safe place while you work on the battery.

  • Gather Battery Replacement
  • Prepare workspace area
  • Remove Key from Fob

Opening the Key Fob and Replacing the Battery

Opening the Key Fob and Replacing the Battery

Step 1: Locate the Key Fob

The first step to changing the key battery in your Toyota Corolla is to locate the key fob itself. The key fob is a small, rectangular device that houses the car’s key and has buttons to lock and unlock the doors.

Step 2: Remove the Key from the Fob

Step 2: Remove the Key from the Fob

Once you have located the key fob, remove the car key from it. The key is usually held in place by a small release button or spring-loaded latch. Press the button or release the latch to remove the key.

Step 3: Open the Key Fob

Now that you have the key removed, you can open the key fob to access the battery. The fob is usually held together by small screws or clips. Use a screwdriver or flat tool to remove the screws or pry open the clips to open the key fob.

Related article:  Where should i buy a battery for my car

Step 4: Remove the Battery

Once the key fob is open, you can remove the old battery. The battery is usually a small round disc held in place by a clip or spring. Use your fingers or a tool to remove the old battery.

Step 5: Insert the New Battery

Now that the old battery is removed, you can insert the new battery. Make sure the new battery is in the correct orientation, with the positive side facing up. Use your fingers or a tool to clip the battery into place.

Step 6: Close the Key Fob

With the new battery in place, you can now close the key fob. Line up the clips or screws and press the fob closed. Reinsert the car key into the fob.

Step 7: Test the Key Fob

Step 7: Test the Key Fob

Finally, you can test the key fob to make sure it is working properly. Press the lock or unlock button to see if the car doors respond. Congratulations! You have successfully changed the battery in your Toyota Corolla key fob.

Testing the Key Fob After Battery Replacement

Step 1: Approach Your Car

Make sure you are within range of your car. Approach your Toyota Corolla and stand close enough so that you can press the button on your key fob.

Step 2: Press the Lock and Unlock Buttons

Press the lock button and check if the car locks. Then press the unlock button and see if the car unlocks. If it works, the battery replacement was successful.

Related article:  Why does walmart only show one battery for my car

Step 3: Use the Panic Button

Step 3: Use the Panic Button

Test the panic button on your key fob. Press and hold it down for a few seconds. Your Toyota Corolla should start to honk and flash its lights.

Step 4: Check the Battery Level on Your Key Fob

If your Toyota Corolla has a key fob that shows the battery level, check it to make sure the new battery is working properly. If the battery is still low, you may need to replace the battery again.

Step 5: Reprogram if Necessary

If the key fob is still not working correctly, you may need to reprogram it. Check your Toyota Corolla’s owner’s manual for instructions on how to program the key fob.

Вопрос-ответ:

How do I know when it’s time to change the battery in my Toyota Corolla key?

You may notice your key fob is not working properly or has a weaker signal. If your key is taking more than one press to unlock your car, it’s probably time to change the battery.

What type of battery does a Toyota Corolla key fob take?

The Toyota Corolla key fob takes a CR2032 battery, which is a 3V lithium coin cell battery.

Where can I buy a replacement battery for my Toyota Corolla key fob?

You can buy a replacement battery for your Toyota Corolla key fob at most electronic stores or online retailers. Some auto parts stores may also carry them.

How do I open the Toyota Corolla key fob to replace the battery?

First, locate the small indentation on the side of the key fob and use a small flathead screwdriver or a coin to pry it open. Once you have opened the fob, carefully remove the old battery.

Related article:  Does prius have a separate battery for starting the car

Do I need to reprogram my Toyota Corolla key after changing the battery?

No, you do not need to reprogram your Toyota Corolla key after changing the battery. However, you may need to resync the key fob if it does not work properly after battery replacement.

Can I replace the Toyota Corolla key fob battery myself?

Yes, you can replace the Toyota Corolla key fob battery yourself. It is a simple process that requires only a small flathead screwdriver or a coin.

Can I reuse the old battery in my Toyota Corolla key fob?

No, you cannot reuse the old battery in your Toyota Corolla key fob. Once a lithium battery has been depleted, it cannot be recharged or reused.

Видео:

Toyota corolla verso -2009 keyfob battery change

Toyota corolla verso -2009 keyfob battery change Автор: Mike H 12 лет назад 1 минута 3 секунды 108 287 просмотров

[HOW TO] 2010+ VW Complete Volkswagen Key Fob Shell Replacement Tutorial

[HOW TO] 2010+ VW Complete Volkswagen Key Fob Shell Replacement Tutorial Автор: FasterAutoKeys 4 года назад 15 минут 1 246 829 просмотров

Отзывы

Jennifer Lopez

As a Toyota Corolla owner, this article was very helpful for me when it came to changing the battery in my car key. I always assumed it was a difficult task, but the step-by-step instructions and accompanying photos made it seem easy. I appreciate the author’s emphasis on safety, reminding readers to remove the battery carefully and to avoid touching the contacts. Overall, a great guide for anyone needing to change the battery in their Toyota Corolla car key!

Related article:  Noise battery makes when not working in car

Christopher Williams

As a Toyota Corolla owner, I found this article on changing the car key battery extremely helpful. The step-by-step instructions were easy to follow, and I appreciate the photos that were included. I had never changed a car key battery before, but this article made it seem like a simple task that anyone can do. I also learned that I can purchase a replacement battery at any electronics store. Overall, I highly recommend this article to fellow Toyota Corolla owners who may need to replace their key battery.

Robert Johnson

Thanks for the informative article on how to change the battery in my Toyota Corolla car key. As a male driver who’s always on the go, having a reliable car key is crucial. I appreciate the step-by-step instructions and visuals that make the process so much easier to follow. Swapping out the battery may seem like a small task, but it can save drivers from frustrating situations like getting locked out of their cars. Thanks again for sharing this helpful guide, and I’ll be sure to bookmark it for future reference.

Michael Scott

As a Toyota Corolla owner, I’m grateful for the guide on how to change the car key battery. It’s not always easy to figure out these things on your own, and a dead battery in your car key can be quite frustrating. The step-by-step instructions with pictures make the process very simple and easy to follow. The article also provides information on what type of battery to use and how to properly dispose of the old one, which is helpful and environmentally responsible. Overall, this guide is very useful and will definitely come in handy next time my car key needs a new battery. Thanks for sharing!

Related article:  Where to buy used 48 volt hybrid car batteries

Natalie Brown

As a Toyota Corolla owner, I found this article very helpful in learning how to change the battery in my car key. The step-by-step instructions were easy to follow and made the process much less intimidating. I appreciated the clear photos that accompanied each step, as they helped me understand what I needed to do. One tip I found particularly useful was to use a flat head screwdriver to gently pry open the key fob. I had been hesitant to do this before reading the article, but it made all the difference in getting the fob open without damaging it. Overall, I would definitely recommend this article to other car owners who need to replace their key fob batteries. It saved me time and money by eliminating the need to take my car to a dealer or locksmith, and I feel much more confident in my ability to perform this simple maintenance task on my own.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button